फ़िल्टर बैग

PTFE Dust Collector Filter Bags Specs - Material: 100% PTFE membrane + polyester backing (heat resistant to260C) - Pore size: 0.2um nominal ( 99.9% filtration efficiency) - Standard sizes: 4 6in, 6 8in, 8 10in (custom sizes on request) - Coupling: Snap on rings for 2 in, 2 in, 3 in hose fittings - Pressure drop: 0.5inwg at rated flow (low resistance design) - Features: Anti static coating, easy clean (tap out dry dust), chemically inert Need a particular size, quantity, or pricing? Let me know!

Industrial filter bags are used in various industries, including chemical, pharmaceutical, food and beverage, and wastewater treatment, to name a few. Here are some common specifications for industrial filter bags: General Specifications- Material: Filter bags are made from various materials, including: - Polypropylene (PP) - Polyester (PET) - Polyamide (PA) - Polyethylene (PE) - Glass fiber - Ceramic - Filter Rating: The filter rating is the size of the particles that the filter bag is designed to capture, typically measured in microns (μm). - Size: Filter bags come in various sizes, including: - Diameter: 2-12 inches (50-300 mm) - Length: 12-72 inches (300-1800 mm) - Connection Type: Filter bags have different connection types, including: - Ring top - Gasket top - Clamp ring - Screw ring Performance Specifications- Flow Rate: The flow rate of a filter bag is the volume of fluid that can pass through it per unit time, typically measured in gallons per minute (GPM) or liters per minute (LPM). - Pressure Drop: The pressure drop is the difference in pressure between the inlet and outlet of the filter bag, typically measured in pounds per square inch (PSI) or bar. - Temperature Range: Filter bags are designed to operate within a specific temperature range, typically between -20C to 150C (-4F to 302F). Industry-Specific Specifications- Chemical Resistance: Filter bags used in chemical processing industries must be resistant to chemicals, such as acids, bases, and solvents. - FDA Compliance: Filter bags used in food and beverage industries must comply with FDA regulations. - ASME Compliance: Filter bags used in pressure vessel applications must comply with ASME standards.

- Material: 100% Nomex aramid fiber, heat treated for durability - Temp rating: Up to370C (continuous) great for hot air/fuel gas systems - Filtration: 5um nominal pore size, 99% efficiency for fine dust & oil mist - Standard sizes: 4 6in, 6 8in, 8 10in (custom lengths on request) - Coupling: Snap on rings for 2 in, 2 in, 3 in hose fittings - Features: Flame resistant, low pressure drop, anti static coating optional, easy clean (tap out dry residue

Non-Woven Filter Bags are widely used in various industries, including chemical, pharmaceutical, food and beverage, and wastewater treatment. Here are some common specifications for non-woven filter bags: General Specifications- Material: Non-woven filter bags are made from various materials, including: - Polypropylene (PP) - Polyester (PET) - Polyamide (PA) - Polyethylene (PE) - Filter Rating: The filter rating is the size of the particles that the filter bag is designed to capture, typically measured in microns (μm). - Size: Non-woven filter bags come in various sizes, including: - Diameter: 2-12 inches (50-300 mm) - Length: 12-72 inches (300-1800 mm) - Connection Type: Non-woven filter bags have different connection types, including: - Ring top - Gasket top - Clamp ring - Screw ring Performance Specifications- Flow Rate: The flow rate of a non-woven filter bag is the volume of fluid that can pass through it per unit time, typically measured in gallons per minute (GPM) or liters per minute (LPM). - Pressure Drop: The pressure drop is the difference in pressure between the inlet and outlet of the filter bag, typically measured in pounds per square inch (PSI) or bar. - Temperature Range: Non-woven filter bags are designed to operate within a specific temperature range, typically between -20C to 150C (-4F to 302F). Non-Woven Fabric Specifications- Fabric Weight: The weight of the non-woven fabric, typically measured in grams per square meter (GSM). - Fabric Thickness: The thickness of the non-woven fabric, typically measured in millimeters (mm). - Pore Size: The size of the pores in the non-woven fabric, typically measured in microns (μm). Industry-Specific Specifications- Chemical Resistance: Non-woven filter bags used in chemical processing industries must be resistant to chemicals, such as acids, bases, and solvents. - FDA Compliance: Non-woven filter bags used in food and beverage industries must comply with FDA regulations. - ASME Compliance: Non-woven filter bags used in pressure vessel applications must comply with ASME standards. Example Specifications- Model: PP Non-Woven Filter Bag - Material: Polypropylene - Filter Rating: 1 μm - Size: 4 inches (100 mm) diameter x 24 inches (600 mm) length - Connection Type: Ring top - Flow Rate: 10 GPM (38 LPM) - Pressure Drop: 5 PSI (0.34 bar) - Temperature Range: -20C to 80C (-4F to 176F) - Fabric Weight: 150 GSM - Fabric Thickness: 0.5 mm - Pore Size: 1 μm Considerations- Filtration Efficiency: The ability of the non-woven filter bag to capture particles of a specific size. - Dust Holding Capacity: The amount of dust or particles that the non-woven filter bag can hold before needing to be replaced. - Chemical Compatibility: The ability of the non-woven filter bag to resist chemical degradation. - Cost: The cost of the non-woven filter bag, including replacement and maintenance costs